Cellulose Accopac® Impervapac™ Interface Solutions Specifications

Specifications and Product Data featured on this page:
Cellulose Accopac: CN-705, CS-301, RN-8011
Impervapac: N-8051
Cellulose Accopac® 0.8mm (.031″)
Products Characteristics and Uses Density
g/cm³
(45 lbs./cu.ft.)
(min.)
ASTM F 38 Minimum
Recovery
%
ASTM F 152 Type III ASTM F 146 Oil No. 3 ASTM F 146 Fuel B ASTM F 146 Distilled Water Fiber
Compressibility
% @ 6.9 MPa
(1000 psi)
Minimum
Tensile
(MPa) psi
Thickness
Increase
Maximum %
Weight
Increase
Maximum %
Compressibility
% @ 34.5 MPa
(5000 psi)
Tensile
Loss
Maximum %
Thickness
Increase
Maximum %
Weight
Increase
Maximum %
Thickness
Increase
Maximum %
Weight
Increase
Maximum %
CN-705 Nitrile butadiene rubber binder for fluid resistance Generally suitable for oil, gasoline and water services. For applications up to 180°C (350°F). 0.61 (38) 25-40 25 5.5 (800) 15 70 25 75 25 50 Nitrile Butadiene
CS-301 Dependable seal in water and high aniline point oil and in other service not involving aromatic fuels and certain solvents. Controlled-Swell styrene binder. For applications up to 180°C (350°F). 0.61 (38) 25-40 30 4.8 (700) 30 105 35 95 30 60 Controlled-Swell
Styrene Butadiene
RN-8011 A highly compressible material with high rubber content, providing excellent sealing of water and oil at low flange loads. Nitrile butadiene binder. For applications up to 180°C (350°F). 0.61 (38) 35-60 15 1.5 (220) 120 120 45 Nitrile Butadiene

 

Impervapac 0.8mm (.031″)
Products Characteristics and Uses Density
g/cm³
(45 lbs./cu.ft.)
(min.)
ASTM F 38 Minimum
Recovery
%
ASTM F 152 Type II ASTM F 146 Oil No. 3 ASTM F 146 Fuel B ASTM F 146 Distilled Water Fiber
Compressibility
% @ 6.9 MPa
(1000 psi)
Tensile
Strength
(MPa) psi
Thickness
Increase
Maximum %
Weight
Increase
Maximum %
Compressibility
% @ 34.5 MPa
(5000 psi)
Tensile
Loss
Maximum %
Thickness
Increase
Maximum %
Weight
Increase
Maximum %
Thickness
Increase
Maximum %
Weight
Increase
Maximum %
N-8051 Recommended for low internal pressure and low flange pressure applications up to 13.8 MPa (2000 psi ). Moderate oil resistance contains no asbestos. Nitrile butadiene binder. For applications up to 180°C (350°F). 40 2.8 (400) 35 45 Nitrile Butadiene