| Thermo-Tork - for use up to 400°C (750°F) |
| Products |
Characteristics and Uses |
Density
g/cm³
(45 lbs./cu.ft.)
(min.) |
ASTM F 36
Compressibility
% @ 34.5 MPa
(5000 psi) |
Minimum
Recovery
% |
ASTM F 152
Tensile
Strength
(MPa) psi |
ASTM F 36 Oil No. 3 |
ASTM F 36 Fuel B |
Composition |
Tensile
Loss
Maximum % |
Thickness
Increase
Maximum % |
Compressibility
%
Maximum |
Weight
Increase
Maximum % |
Thickness
Increase
Maximum % |
Fiber |
Rubber
Binder |
| TN-9000 |
Fully Cured binder, highly compressed material with good tensile strength, low creep relaxation, excellent fuel and oil resistance. For high flange pressure applications up to 400°C (750°F). |
1.44 (90) |
7-17 |
50 |
17.2 (2000) |
35 |
10 |
30 |
20 |
15 |
Aramid |
Fully Cured
Nitrile Butadiene |
| TN-9001 |
A heavy-duty. Latent Cure material with nitrile binder for heavy-duty applications at elevated temperatures up to 400°C (750°F). Excellent oil resistance. |
1.28 (80) |
15-30 |
40 |
13.8 (2000) |
40 |
20 |
35 |
30 |
30 |
Aramid |
Latent Cure System
Nitrile Butadiene |
| TN-9004 |
Cost-effective heavy-duty compressed material with Fully Cured nitrile binder. Excellent fuel and oil resistance. Good tensile strength. For high flange pressure applications up to 350°C (650°F). |
1.50 (95) |
5-20 |
45 |
17.2 (2500) |
45 |
15 |
25 |
20 |
15 |
Aramid |
Fully Cured
Nitrile Butadiene |
| TN-9005 |
Cost-effective heavy-duty material Latent Cure system with nitrile binder. Good conformity for irregular flange surfaces. For applications up to 350°C (650°F). |
1.28 (80) |
15-30 |
20 |
10.3 (1500) |
50 |
20 |
50 |
40 |
20 |
Aramid |
Latent Cure System
Nitrile Butadiene |
| TS-9006 |
Cost-effective heavy-duty compressed material with Fully Cured styrene binder. Recommended for use in oil, water, or steam. Good tensile strength. For service in high flange pressure applications up to 350°C (650°F). |
1.50 (95) |
5-20 |
40 |
10.3 (1500) |
- |
20-60 |
- |
- |
15-40 |
Aramid |
Fully Cured Styrene Butadiene |
| TS-9003 |
Controlled-Swell alternative to high-swell compressed asbestos materials. Latent cure styrene binder on heat-resisting thermally stable fibers offers good sealing characteristics at low flange pressures. Conforms well to irregular flange surfaces. For applications up to 350°C (650°F). |
1.44 (90) |
15-30 |
20 |
6.9 (1000) |
- |
45-85 |
- |
- |
20-50 |
Aramid |
Latent Cure System
Styrene Butadiene
"Controlled Swell" |
