| Cellulose Accopac® 0.8mm (.031") |
| Products |
Characteristics and Uses |
Density
g/cm³
(45 lbs./cu.ft.)
(min.) |
ASTM F 38 |
Minimum
Recovery
% |
ASTM F 152 Type III |
ASTM F 146 Oil No. 3 |
ASTM F 146 Fuel B |
ASTM F 146 Distilled Water |
Fiber |
Compressibility
% @ 6.9 MPa
(1000 psi) |
Minimum
Tensile
(MPa) psi |
Thickness
Increase
Maximum % |
Weight
Increase
Maximum % |
Compressibility
% @ 34.5 MPa
(5000 psi) |
Tensile
Loss
Maximum % |
Thickness
Increase
Maximum % |
Weight
Increase
Maximum % |
Thickness
Increase
Maximum % |
Weight
Increase
Maximum % |
| CN-705 |
Nitrile butadiene rubber binder for fluid resistance Generally suitable for oil, gasoline and water services. For applications up to 180°C (350°F). |
0.61 (38) |
25-40 |
25 |
5.5 (800) |
15 |
70 |
- |
- |
25 |
75 |
25 |
50 |
Nitrile Butadiene |
| CS-301 |
Dependable seal in water and high aniline point oil and in other service not involving aromatic fuels and certain solvents. Controlled-Swell styrene binder. For applications up to 180°C (350°F). |
0.61 (38) |
25-40 |
30 |
4.8 (700) |
30 |
105 |
- |
- |
35 |
95 |
30 |
60 |
Controlled-Swell
Styrene Butadiene |
| RN-8011 |
A highly compressible material with high rubber content, providing excellent sealing of water and oil at low flange loads. Nitrile butadiene binder. For applications up to 180°C (350°F). |
0.61 (38) |
35-60 |
15 |
1.5 (220) |
- |
120 |
- |
- |
- |
120 |
- |
45 |
Nitrile Butadiene |
