|
Synthseal® |
 |
Specifications and product data on this page: D-8080, N-8090, N-8092, N-8094, S-8091
|
Synthseal® For use up to 180oC (350oF)
|
|||||||
| Product | Description | Density g/cm3 (lbs. ft.3) |
Compression % @ 34.5 MPa (5,000 Psi) |
Recovery % (Minimum) |
Tensile MPa (Psi) |
Oil Tensile Loss % (max) |
No. 3 Thickness Inc. % (max) |
| D-8080 | -See TDS – | ||||||
| N-8090 | N-8090 has a latent cure nitrile butadiene rubber binder and reinforced cellulose fiber. It has excellent oil resistance, good sealing characteristics. | 1.28 (80) | 15 – 25 | 35 | 13.80 (2,000) | 45 | 30 |
| N-8092 | N-8092 is used in automotive, small engine, and compressor applications. It has excellent crush resistance at high flange pressures, and excellent sealing properties with oil, fuel, and water. | 1.20 (75) | 15 – 30 | 35 | 11.00 (1,600) | 30 | 20 |
| N-8094 | N-8094 is a medium density material that conforms well to irregular flange surfaces and has very good crush resistance at high flange pressures. It is intended for sealing oils, fuels, and water. | .87 (54) | 15 – 30 | 20 | 8.60 (1,250) Under 1mm 6.90 (1,000) |
30 | 7 |
| S-8091 | S-8091 is controlled-swell, Latent cure styrene butadiene bound material with reinforced cellulose fiber. It is intended for applications sealing oil, fuel, and low-pressure steam. | 1.20 (75) | 15 – 25 | 25 | 12.41 (1,800) | – | 30 – 75 |
