|
Cellulose Accopac® ImpervapacTM |
 |
Specifications and product data on this page: Cellulose Accopac: CN-705, CS-301, RN-8011 Impervapac: N-8051
|
Cellulose Accopac® 0.8mm (.031”)
|
|||||||
| Product | Description | Density g/cm3 (lbs. ft.3) |
Compression % @ 34.5 MPa (5,000 Psi) |
Recovery % (Minimum) |
Tensile MPa (Psi) |
Oil Thickness Inc. % (max) |
No. 3 Weight Inc. % (max) |
| CN-705 | – See TDS – | ||||||
| CS-301 | CS-301 has a controlled-swell styrene butadiene rubber binder. It is intended for use in applications with water, high analine point oil, and other applications not including aromatic fuels and certain solvents. | .61 (38) | 25 – 40 | 30 | 4.8 (700) | 30 | 105 |
| RN-8011 | RN-8011 is a low-density cellulose fiber material with high rubber filler content and a nitrile butadiene rubber binder. It provides excellent sealing of oil and water at low flange pressures, and is used primarily for engine and transmission pan gaskets, water pumps, and environmental seals. | .61 (38) | 35 – 60 | 15 | 1.5 (220) | – | 120 |
|
ImpervapacTM 0.8mm (.031”)
|
|||||||
| Product | Description | Density g/cm3 (lbs. ft.3) |
Compression % @ 34.5 MPa (5,000 Psi) |
Recovery % (Minimum) |
Tensile MPa (Psi) |
Oil Thickness Inc. % (max) |
No. 3 Weight Inc. % (max) |
| N-8051 | -See TDS – | ||||||
