Synthseal®

Specifications and product data on this page: D-8080, N-8090, N-8092, N-8094, S-8091

Synthseal® For use up to 180oC (350oF)
Product Description Density
g/cm3
(lbs. ft.3)
 
Compression %
@ 34.5 MPa
(5,000 Psi)
 
Recovery %
(Minimum)
 
 
Tensile
MPa  (Psi)
 
 
Oil
Tensile
Loss %
(max)
No. 3
Thickness
Inc. %
(max)
D-8080 -See TDS –
N-8090 N-8090 has a latent cure nitrile butadiene rubber binder and reinforced cellulose fiber. It has excellent oil resistance, good sealing characteristics. 1.28 (80) 15 – 25 35 13.80 (2,000) 45 30
N-8092 N-8092 is used in automotive, small engine, and compressor applications. It has excellent crush resistance at high flange pressures, and excellent sealing properties with oil, fuel, and water. 1.20 (75) 15 – 30 35 11.00 (1,600) 30 20
N-8094 N-8094 is a medium density material that conforms well to irregular flange surfaces and has very good crush resistance at high flange pressures. It is intended for sealing oils, fuels, and water. .87 (54) 15 – 30 20 8.60 (1,250)
Under 1mm

6.90 (1,000)
Over 1mm

30 7
S-8091 S-8091 is controlled-swell, Latent cure styrene butadiene bound material with reinforced cellulose fiber. It is intended for applications sealing oil, fuel, and low-pressure steam. 1.20 (75) 15 – 25 25 12.41 (1,800) 30 – 75